What should we do if we encounter the slow speed problem in the injection molding production process, what caused it, how to improve the injection molding production and processing speed, a manufacturer with 37 years of experience in mold opening processing and customization, I will give you answers from the following points.
1. The plastic temperature and mold temperature are high, resulting in long cooling time.
2. Whether the mold design is reasonable, the design should be convenient for demoulding, and the design operation should be fully automated as much as possible.
3. The glue melting time is long, the back pressure should be reduced, less recycled materials should be used to prevent overhead, and the feeding section should be cooled sufficiently.
4. The movement of the machine is slow, and the oil circuit and circuit can be adjusted to make it accelerate properly.
5. The nozzle drools and hinders normal production. Apply a self-locking nozzle or lower the temperature of the nozzle.
6. The manufacturing wall thickness is too large, resulting in too long cooling time.
7. Insufficient heating of the barrel, replace the machine with a large plasticizing capacity or strengthen the preheating of the material.
8. Whether the staff have experience and whether the operation is in place
